TDK-EPC, a group company of the TDK Corporation, presents snap-in aluminum electrolytic capacitors from EPCOS that enable optimal contact to heat sinks. This permits link circuit capacitors to be efficiently cooled, thus significantly increasing their ripple current capability and operating life. Therefore, the new capacitors are especially suited for applications in frequency converters and professional power supplies that have very high ripple current loads and offer the possibility of base cooling.
Because of their special winding design the ESR values of the new capacitors have been lowered by 30 percent at 60 °C and the thermal resistance between base and windings has been reduced by 50 percent. The robust capacitors also feature a specially reinforced case for high long-term stability.
Thanks to the reduction of their longitudinal tolerance to ±0.2 mm, entire capacitor banks can be connected without problems via comparatively thin thermal pads to heat sinks. This ensures an optimal thermal connection to the heat sink and simultaneously lowers costs. Under suitable operating conditions, up to 50 percent higher ripple current capability can be achieved.
These snap-in capacitors for base cooling are available in the B43540* (85 °C), B43543* (105 °C), B43505* (105 °C) series for dimensions of 30 x 35 mm to 35 x 55 mm. They are equipped as standard with a PET shrunk sleeve as insulation and are RoHS-compatible. If required, they can also be supplied without insulation or with mounted thermal pads.
Glossary
Main applications
- DC link capacitors in frequency converters and professional power supplies with heat sinks.
- In DC link circuits with very high ripple current loads per capacitance.
Main features and benefits
- Long useful life
- High reliability
- Outstanding ripple current capability
- Low ESR values at operating temperatures above 50 °C
- Minimized thermal resistance between base and winding
- Suitable for use of thin thermal pads
- RoHS-compatible
About TDK-EPC Corporation
TDK-EPC Corporation (TDK-EPC), a TDK group company, is a leading manufacturer of electronic components, modules and systems headquartered in Tokyo, Japan. TDK-EPC has emerged from the combination of the electronic components business of TDK and the EPCOS Group and markets its products under the product brands, TDK and EPCOS.
The product portfolio includes ceramic, aluminum electrolytic and film capacitors, ferrites and inductors, high-frequency components such as surface acoustic wave (SAW) filter products and modules, piezo and protection components, and sensors. With this product spectrum TDK-EPC offers a broad range of products and solutions of outstanding value from a single source and focuses on demanding markets in the areas of information and communication technology and automotive, industrial and consumer electronics. The company has design and manufacturing locations and sales offices in Asia, Europe, and in North and South America.
Further information on the products can be found under 
www.epcos.com/alu_snap
Please forward reader inquiries to:
EPCOS AG
Fax +49 89 636-22471
marketing.communications@epcos.com
;){kind=link}
;){kind=link}