Convenience-specific Features

• Low ESR
• High reliability
• Compact design
• High ripple current capability
• Capacitors with AEC-Q200 qualification available

• Bidirectional protection for ESD
• High ESD stability acc. to IEC 61000-4-2 Level 4 and ISO 10605
• Low capacitance types for high-speed signal immunity

• Bidirectional protection for ESD
• High ESD stability acc. to IEC 61000-4-2 Level 4 and ISO 10605
• Automotive series for jump-start and load-dump protection acc. to ISO 7637
• Nickel barrier series acc. to AEC-Q200

• Recommended materials for automotive applications:
  N49, N87, N92, N95, N97
• CAN bus choke materials: K1, K10
• Suitability of other materials depends on transformer design
• Wide range of ferrite accessories

• Long-term stability
• High reliability
• Self-healing capability
• Capacitors with AEC-Q200 qualification available

• Wide temperature range from –55 °C to +150 °C
• Miniaturized versions
• High mechanical strength
• Suitable for lead-free soldering profiles acc. to JEDEC J-STD 020D
• Qualified acc. to AEC-Q200

• Long-term stability
• High measuring accuracy
• Short response time
• Temperature measurement up to +260 °C
• Heat resistive and highly stable
• Rugged design
• Compact dimensions
• SMD NTCs are qualified acc. to AEC-Q200

Integrated air duct sensors

• Lightweight full plastic version with fast response

Evaporator fin temperature sensors

• Metal tube sensors to directly measure the evaporator fin temperature

Evaporator air temperature sensors

• NTC directly in the air for fast response time
• Overmolded design
• Humidity resistant

Solar sensors

• Mono and dual sun sensors

Double sensors

• Combined NTC and PTC sensors with wire harness

Outside temperature sensors

• Overmolded package
• Cable-bound or integrated connector versions
• Humidity resistant
• Customer-specific design

• Piezo-resistive dies and transmitters
• Small dimensions
• Long-term stability
• High media resistance

• Overcurrent protection
• Limit temperature sensors
• Heating elements

SAW filters

• SMD ceramic and automotive CSSP package available
• Operating temperature range from –40 to +125 °C
• Patented passivation technologies for enhanced reliability
• Qualified acc. to AEC-Q200

Resonators

• Operating temperature range from –40 to +125 °C
• Patented passivation technologies for enhanced reliability
• Tight frequency tolerances down to ±25 kHz
• Small SMD ceramic package (2 x 2.5 mm²) available
• Qualified acc. to AEC-Q200

• Material class –40 °C to +155 °C
• High power density
• Advanced thermal behaviour
• Platform designs qualified acc. to AEC-Q200

Leaded disk varistors

• Automotive grade ratings (load-dump, jump-start)
• Stable protection level
• Minimum leakage current
• Operating temperature up to +125 °C
• High resistance to cyclic temperature stress
• Qualified acc. to AEC-Q200